How to Flash Step guide?

The guide to Download LG Flash Tool is easy to follow up with its specific step guide. So here we bring you the complete LG Flash Step Guide to make sure you take your flashing attempts right to the requirement.

Note: To run the process Download LG Flash Tool you must have official stock firmware (KDZ or CAB) to your LG mobile version

Step 1: Download and install the updated LG USB Drivers on your Windows PC (If you already have, please check for the latest update)

Step 2: Download LG Flash Tool and extract the tool to get the file folder

Step 3: Boot the Android LG device to Download mode (to turn into Download mode, long press and hold Volume Up) and connect through a USB cable

Step 4: Now launch LG Flash Tool exe from the extracted folder

Step 5: Once you open the tool, you will see the LG Flash Tool APK interface

Step 6: In the option “select type” you will get a drop down where you have to pick CDMA

Step 7: Continue with “Select File” and locate the firmware file you have prepared with (Make sure you have Stock firmware ready to locate)

Step 8: Hit “Normal Flash” button

Step 9: Click “Start” Phone read information dialog box

Step 10: Then you will get a small box to select country and the language

Once you hit “Ok”, the process of Android LG Flash will begin. This would take up to 15 minutes maximum depending on the size of the firmware. With the completion of the progress, the device will reboot automatically. So by then you are ready to disconnect the device from the LG Flash Tool APK and enjoy.